SMC News & Events
SMC Exhibits at SLAS 2020
Tuesday, January 14, 2020
Visit the SMC Booth 1929 to experience the latest innovations in laboratory science and technology and the opportunity to see, hear, touch and feel SMC’s most advanced and important technologies to support the laboratory automation marketplace.
EX600 Wireless Solenoid Valve Manifold Featured in Hydraulics and Pneumatics Magazine
Friday, December 06, 2019
Wireless communication in our everyday electronic mobile devices has become so pervasive that it’s difficult to remember when such connectivity didn’t exist. Conversely, this level of connectivity has yet to dominate the factory floor. However, with the increased focus on IIoT, this may soon become a reality.
SMC Exhibits at Power-Gen in New Orleans, Nov. 19~21
Thursday, November 07, 2019
Visit SMC at Power-Gen International Booth 1610. Power-Gen one of the world’s largest power generation events focused on all forms of energy from traditional Gas Turbine, Clean Coal and Nuclear Technologies to renewable and smart energy sources.
SMC Exhibits at Fabtech in Chicago, Nov. 11~14
Tuesday, October 29, 2019
SMC Corporation of America will exhibit at FabTech 2019 (Nov. 11-14), North America’s largest metal forming, fabricating, welding and finishing event at McCormick Place in Chicago at booths A1143 and A1225.
SMC at Pack Expo Las Vegas International 2019
Monday, September 16, 2019
SMC Corporation of America will exhibit at Pack Expo Las Vegas 2019 at the Las Vegas Convention Center, Lower South Hall Booth 6169 on September 23-25.
SMC Exhibits at Weftec at McCormick Place, Chicago Sept. 23 - 25
Friday, September 13, 2019
Visit SMC at Weftec North Hall, Booth 8500 for the latest developments in wireless communication technology in EtherNet/IP™ protocol supporting solenoid valve manifolds, JSXFA Dust Collector / Jet Pulse Valves with a heavy-duty elastomer diaphragm to extend valve longevity for up to 10 million cycles for baghouse filter applications, a multi-position air servo cylinder, the latest technologies supporting Internet of Things in the industrial space, positioners for industrial process valves as well as flow sensors and switches.
SMC Exhibited at The International Baking Industry Expo in Las Vegas
Tuesday, August 20, 2019
SMC Corporation of America will exhibit at the International Baking Industry Exposition in Las Vegas at the Convention Center, North Hall Booth #845 on September 8–11. IBIE is where next generation baking technology is launched and where new trends are discovered.
SMC To Double Capacity Of Its Sales Academy
Thursday, August 15, 2019
SMC Corporation of America, a leading global pneumatics and industrial automation components manufacturer will double the size of its Sales Academy program starting from January 2020. The SMC Sales Academy is a six-month curriculum designed and taught by professional trainers to develop Sales Trainees and facilitate their transition into Outside Sales positions.
SMC Exhibited at AACC, Clinical Lab Expo, Anaheim, CA – August 6 to 8
Friday, August 09, 2019
The American Association for Clinical Chemistry (AACC) is a global organization dedicated to clinical laboratory science and its application to healthcare. Laboratory medicine is a rapidly evolving discipline as a result of biomedical discoveries, innovations in technology, and the changing healthcare environment.
SMC Corporation of America Launches FRL Configurator
Tuesday, August 06, 2019
SMC Corporation of America, a leading global pneumatics and industrial automation components manufacturer, has launched an online FRL Configurator.
SMC Exhibits at SEMICON West 2019, July 9~11 in San Francisco
Monday, July 08, 2019
Visit SMC at SEMICON West, the premier annual event for the global microelectronics industry, granting access to the latest innovations, products, processes, and services for the design and manufacture of tomorrow’s trends such as: Smart Transportation, Smart Manufacturing, MedTech, Big Data, IoT, and the cognitive technologies that are transforming the world.
SMC Corporation Becomes Certified UR+ Developer
Wednesday, June 19, 2019
SMC Corporation of America, a leading global pneumatics and industrial automation components manufacturer located in Noblesville, Indiana, is proud to announce its partnership with Universal Robots by becoming a certified UR+ Developer in the End-Effectors category.
SMC Exhibited at The Clean Show in New Orleans
Friday, June 14, 2019
The Clean Show is the world’s premier trade show for the laundry, dry cleaning and textile services industries featuring working demonstrations of equipment and products for all segments of the industry, drawing exhibitors and attendees from around the world, and attracting upwards of 13,000 visitors from over 100 countries and territories.
SMC Exhibits at Laser World of Photonics - Messe, Munich June 24~27
Tuesday, June 04, 2019
Visit SMC at Hall A3, Booth 443 to experience the latest innovations and technologies for components supporting the photonics and laser industries at Laser World of Photonics 2019, the premier international event that features a unique combination of research, innovation technology and industrial applications spanning a wide range of solutions from components to systems.
SMC Pneumatics (Canada) Ltd. Announces Company Name Change to SMC Automation Canada, Ltd.
Thursday, May 30, 2019
SMC and Ed Carpenter Racing Together Again at the Indy 500
Wednesday, May 01, 2019
SMC Corporation of America (SMC) is thrilled to announce its continued partnership with Ed Carpenter Racing (ECR) for the second consecutive year with its logo prominently displayed on Ed Carpenter’s No. 20, bold blue Indy Car for the 103rd Running of the Indianapolis 500 on May 26, 2019.
SMC a Corporate Sponsor of Sales Education Foundation
Friday, April 19, 2019
SMC Corporation of America, a leading global pneumatics and industrial automation manufacturer located in Noblesville, Indiana is proud to announce its corporate sponsorship of the Sales Education Foundation (SEF), a non-profit organization that promotes the establishment of university level sales education.
SMC Exhibits at Craft Brewers Conference & BrewExpo America – Denver, April 9~11
Friday, April 05, 2019
Visit SMC at BrewExpo America, presented by the Brewers Association, the largest industry event focused on craft brewing.
SMC Exhibits at Automate 2019, April 8~11 in Chicago
Friday, March 22, 2019
Visit SMC Corporation of America’s booth at #8139 where we will exhibit end-of-arm tooling for robots supporting pick and place applications such as magnetic, electric and pneumatic grippers, vacuum technologies, electric and pneumatic actuators, as well as static control ionizers, and Category 3/4 Safety residual pressure relief valves.
Partner in Processing with SMC at ProFood Tech 2019
Tuesday, February 26, 2019
Visit SMC at ProFoodTech 2019. SMC will feature its clean design and stainless-steel actuators, wireless communication technology in EtherNet/IP™ protocol supporting solenoid valve manifolds, Safety Shut-off and Exhaust Valves for Category 3/4 (ISO13849-1) as well as the latest technologies supporting Internet of Things in the industrial and processing space.
SMC Exhibits at Photonics West, Feb. 5~7 in San Francisco
Thursday, January 24, 2019
Visit SMC Booth #4237 to experience the latest innovations and technologies for components supporting the photonics and laser industries at SPIE Photonics West 2019.
SMC Exhibits at Power-Gen in Orlando, Dec. 4~6
Tuesday, November 27, 2018
Visit SMC at Power-Gen Booth 2953 for the latest developments in Industrial IoT, Wireless Fieldbus and EtherNet I/P™ ready directional control valves, pulse jet valves, 2-way solenoid valves, positioners for industrial process valves, air dryers and other air prep equipment as well as flow sensors and switches.
SMC Exhibits at FabTech in Atlanta, Nov. 6~8
Wednesday, October 24, 2018
SMC Corporation of America will exhibit at FabTech 2018, North America’s largest metal forming, fabricating, welding and finishing event at Georgia World Congress Center in Atlanta, at booth C13570.
SMC Exhibits at Weftec in New Orleans, Oct. 1~3
Thursday, September 27, 2018
Visit SMC at Weftec Booth 6013 for the latest developments in wireless communication technology in EtherNet/IPTM protocol supporting solenoid valve manifolds, a multi-position air servo cylinder, the latest technologies supporting Internet of Things in the industrial space, positioners for industrial process valves, as well as flow sensors and switches.
Partner in Packaging with SMC at Pack Expo International 2018
Monday, September 17, 2018
Visit SMC at Pack Expo International 2018. SMC will feature its wireless communication technology in EtherNet/IPTM protocol supporting solenoid valve manifolds, the innovation of a square piston actuator to optimize output to area ratio, a higher efficiency air booster/regulator and the latest technologies supporting Internet of Things in the industrial space.
SMC to Exhibit at IMTS in Chicago, Sept 10~15
Thursday, August 30, 2018
SMC Corporation of America will exhibit pneumatic and electrical sensor technologies for machining, fabricating and general automation industries in addition to our extensive standard product line.
SMC Exhibits at AACC, Clinical Lab Expo, Chicago, IL – July 31 ~ August 2
Friday, July 27, 2018
Visit SMC at AACC Clinical Lab Expo to experience the latest technologies supporting the laboratory automation marketplace.
SMC Wins Control Design 2018 Readers’ Choice Award for Pneumatic Systems Controls/Components
Friday, July 06, 2018
SMC Corporation was recognized by Control Design magazine’s Readers’ Choice Awards 2018 for “Give Machine Builders What They Want” as number one in Pneumatic System Controls/Components, and number three in Pneumatic Cylinder/Actuator.
SMC Exhibits at SEMICON West 2018, July 10~12 in San Francisco
Wednesday, June 27, 2018
Visit SMC at SEMICON West; the premier annual event for the global microelectronics industry, highlighting the latest innovations, products, processes, and services for the design and manufacture of today’s most sophisticated electronics.
SMC Exhibits at Global Petroleum Show in Calgary, Alberta June 12~14
Friday, June 08, 2018
Visit SMC at Booth 7260 for the energy industry’s most comprehensive view of the industry at work. Explore live demos and hands-on experiences for the latest innovations and technologies in Energy, Power, Natural Resources, Oil & Gas and Petroleum.
SMC & Ed Carpenter Racing at the Indianapolis 500
Monday, May 14, 2018
SMC will be prominently displayed on ECR’s No. 20 Fuzzy’s Vodka Chevrolet during all on-track activity at the Indianapolis Motor Speedway. The No. 20 will be driven by British rookie Jordan King in this weekend’s INDYCAR Grand Prix before team owner and Indianapolis native Ed Carpenter steps back into the car for his 15th Indianapolis 500.
SMC Exhibits at BrewExpo America Trade Show – Nashville, May 1~3
Friday, April 27, 2018
Visit SMC at BrewExpo America, presented by the Brewers Association, the largest industry event focused on craft brewing.
SMC to Build New Facility at its North American Headquarters
Wednesday, April 25, 2018
SMC to Build a 1 Million Square-foot New Facility at its North American Headquarters. SMC Corporation of America plans to break ground in the summer of 2018 on a new 1.0 million square-foot warehouse on its corporate campus to boost total facility space to 2.6 million square feet at its North American headquarters in Noblesville, Indiana.
SMC's New Product Guide, Volume 4 for the Latest in Industrial Automation
Tuesday, October 10, 2017
Stay current with all of SMC's newest product additions in Industrial Automation.