Blow Off Equipment

Series VMG has a large effective area of 0.05in² (30mm²), without nozzle. Pressure loss is 0.725psi (0.005MPa) or less when nozzle bore size 2.5mm is used.  Piping direction is optional from the top or bottom.  Available nozzles include: male thread; high efficiency; low noise w/male thread; and extension nozzles.

The IBV Air Saving Impact Blow Valve provides increased impact force and instantaneous air blow, while reducing CO2 emissions, air consumption, and operation time by up to 97%. This is achieved by using a unique design that creates a higher peak pressure, which is then released in a short burst of air. This creates a much more powerful impact than traditional blow valves, which use a continuous stream of air. Applications include cleaning and drying parts, dust and debris removal, cooling surfaces and product sorting.

PFMB is a digital flow sensor compatible with air and nitrogen.  Its thermal sensor is protected in a bypass flow path to reduce contact with moisture and contaminants, avoiding accuracy deterioration and damage.  Dimensions and weight have been reduced dramatically compared to the legacy PF2A.  The 4-digit LED display can be red or green, changing when a set point is reached.  Either instantaneous or accumulated flow can be shown.  Options include cable connector type, and bracket mount.  Two outputs are available, including two switch signals, or a switch and analog signal.  PFMB is IP40 rated, and CE and RoHS compliant.

The TCU series is a polyurethane coil tubing that is very flexible and makes compact piping possible. The TCU series comes in three different tube sizes and comes in the standard color of black.

The VX2 series is 2 port direct solenoid valve for general purpose air, medium vacuum and water. Available body materials include resin, aluminum, brass or stainless steel with port size up to 1/2 inch. Resin body is offered with one touch fitting to reduce installation time. It is also available as a manifold to reduce piping.

The updated VXD series is a pilot operated, 2 port solenoid valve. The new VXD is not only smaller, but uses less power compared to the previous version. Available in brass and stainless steel, the VXD series also offers low concentration ozone resistant and oil free options. Flow rate ranges from Cv of 1.9 to 49.

The VXZ series for air is a 2 port, pilot operated solenoid valve capable of operating at higher differential pressures by maintaining a zero differential pressure on the seat. Available with resin, aluminum, brass or stainless steel body material. Standard NBR seal and optional FKM for use with ozone resistant applications. Available in port size 1/4 to 1 inch. Flow rate ranges from Cv of 1.7 to 9.4.

The VQ20/30 series is a pilot operated, two port multi-media valve. The series is compact and lightweight with a large flow capacity. The VQ20/30's long life, high speed coil (up to 20 million cycles at 100cps for pneumatic use) along with its all plastic construction make it an excellent choice for those who want high performance at a lower cost.