This feature is accessible either by using an existing smcusa.com login or by creating a new user registration.

The FRL Configurator will substantially streamline the component selection process, save time and validates a BOM.

Features include:

Virtually assembles a filter, regulator and sometimes lubricator components into a complete bill of materials sheet and CAD model for download.
Selection menu assures that each modular component will physically interface for assembly. (e.g. filter ports: NPT ¼”, regulator ports: NPT ¼” etc.)
The FRL Configurator is the latest enhancement to SMC eTools product selection and sizing software.

Our manifolds and valves can be designed by you.  Online valve manifold configurator that allows you to design your own valve/manifold. You can choose your I/O type, select a specific valve for each station and even choose blanking plates for future expansion.  After designing your SY Series valve/manifold, you can download the CAD model and BOM for your assembly.

Select the correct pneumatic products for your application. For cylinders, solenoid valves, speed controllers, fittings & more. This tool must be downloaded and installed.

Guide Cylinder Selection Software calculates the operating pressure, piston speed, load weight, moment, and kinetic energy from the input values of the part number, mounting orientation, operating pressure, piston speed, mounting position, load weight, and cushion type, determines whether or not they are within their allowable ranges, and displays the judgement results.

Select the appropriate air gripper type and size for your application. This is an online tool that will launch in your browser.

Allows you to select an optimal size of a rotary actuator to rotate a load. This is an online tool that will launch in your browser.

Allows you to select an optimal shock absorber to absorb and reduce the impact when a load stops. This is an online tool that will launch in your browser.

This program facilitates both model selection and characteristic calculations for electric actuator circuits. This tool must be downloaded and installed.

Select the appropriate digital switch or sensor for your application. This is an online tool that will launch in your browser.

Choose the right air dryer configuration for your application.

Select the optimal vacuum adsorption transfer system for a given load to be absorbed. This is an online tool that will launch in your browser.

Select the appropriate after cooler for your application. This is an online tool that will launch in your browser.

Select the appropriate process valve for your application. This is an online tool that will launch in your browser.

Select the appropriate air tank size and type for your application. This is an online tool that will launch in your browser.

Allows you to select an optimal air filter size for water droplet removal, dust filtration oil mist separation and deodorization. This is an online tool that will launch in your browser.

Allows you to select an optimal air prep combination which combines equipment for removing foreign matter and moisture in compressed air, pressure adjustment and lubrication. This is an online tool that will launch in your browser.

Allows you to select the best thermo-chiller size to properly cool your specified equipment.

Power clamp cylinder model selection software

Air and electricity CO₂ emissions, CO₂ emission improvement effects, air leakage loss costs, etc. can be calculated on the web.

The composite moment of inertia or center of gravity of the load that is made up of multiple components can be calculated. This is an online tool that will launch in your browser.

This software calculates pressure drops in the main piping and the recommended flow rate.

Conversion between the relative humidity, atmospheric dew point, and pressure dew point values is possible.
The condensed water amount generated by a change in conditions can also be calculated.

This software calculates the changes in pressure when air is charged to or discharged from the tank, cylinder, etc., and the changes in state due to air compression and expansion.

When high pressure air is required, you can select the optimal size of the booster regulator to boost low pressure air. This is an online tool that will launch in your browser.

The pressure response of the change to a tank, discharge from a tank and charge and discharge between 2 tanks. This is an online tool that will launch in your browser.

Calculation software for air consumption / required air flow capacity.

The sizing and calculation results obtained from this Software can differ from those obtained using actual equipment.

This software greatly contributes to the energy saving of the pneumatic system from the design to the current analysis and improvement simulation.

A pneumatic circuit diagram can be easily created by using the database for pneumatic equipment drawing symbols.  Symbols corresponding to a product part number can be selected. The created circuit diagram can be output in the DXF format or other graphic formats.

Use PneuSAFE to choose the right ISO 13849-compliant product solution for your safety-related application. This free software tool offers you TÜV verified circuits, parts lists and instructions for the most common safety functions and applications.

Product instruction and operation manual database.

Full product configurator for exact part numbers with CAD Model download.